The-designer-starter-kit-Drawing-with-the-correct-posture-1 | ⭐️ The Design Sketchbook |Product Design Sketching Tutorials

Leave A Response Cancel reply

I did not receive the book why is that?...

i want to learn sketching...

Ab a quo consequatur nesciunt odio culpa laborum....

Hello Mat, I have sent it to you by email. :)...

Hi Chou-Tac, I have not received the starter book.I tried 5 times! would you please se...

Hello! I am a product design student and I hope that your tios and tri ks would help me to...

i m very impressive because i am considering basic for sketching is 1 and 2 prospective ...

Hey. I live in Poland and my wish is to o urbansketching. I started to practice cube drawi...

Hi, I'm Mely from the Philippines. Thank you for the references, it's really helpful....

Hi! Tanks allerdings. I have the same Problem. Is it right that Youtube habe to set it bef...

Hey! I am looking forward to learn and improve with your sketchbook. Thank you for your ...

Hi Chou-tac! Thank you very much for your book. It is very well explained and easy to fol...

My name is Art. I am a 3d modeler and texture artist. I am not new to sketching but though...

Hi team, I am finishing industrial engineering and within my career I discovered that I...

Hello Jack, Sketching is an infinite world with plenty of creativity and surprises....

Same here!...

My pleasure Jessie! Anytime if you have a question, do not hesitate to ask :)....

Hi Clau, Welcome on board! Glad you enjoy it. Just a quick TIP, remember that good...

Glad you found it helpful Swanson :). It is essential to have fun when we draw and get ...

Great Jose. Yes you are right, being able to draw ideas fast and on the site is essent...

I am glad you enjoy it Shovon!...

Hello world of sketches...

sketching is my life...

Hello, I recently started kick reconstruction and im learning as much as i can. A big part...

HI! I´m a design lover and apply it in every thing I do and because it. I need to learn h...

Hello Shaine, Thank you very much for sharing your story with us. It is inspiring. ...

I'm from New York and very interested in design. I found your introduction video of sketc...

As an architect I'm starting to constantly for a need of hand drawing on site, beside of b...

Hi I'm Shaine a 2D animation & visual development student from Canada! I just wanted t...

Your book is great....

You have a great project! Hope this article can help you: https://www.thedesignsketchbo...

Let's make it a reality! :)...

Hey Hassan, Thanks for the recommendation! Anytime your students may have a questio...

Thanks for sharing, I will surely recommend your site to my product design students in Mal...

its my dream to learn how to draw every thing in my mind....

Hi, I am a mechanical engineering student and want to improve my sketching skills for bet...

Same here! Welcome on board Vince :)...

Fully agree with you Miguel. Images are a universal language!...

Hope you enjoy the guides Mely :)...

Let me know how it goes Marc! :)...

Hey Deepa, It all starts with perspective. The Designer Starter Kit will you to ge...

Hey John, Please thank your teacher for the recommendation! Are you by chance in Ma...

My pleasure Sahra ! Anytime feel free to leave a comment or send me a message if you h...

Hi, I didn't get the email with the starter kit, can you please look at it? thanks dan...

Hi I'm Sahra, I'm an industrial design grad student in San Francisco. Thank you for provid...

Truly a new beginning for me?I'm in the United States and we are encountering injustice an...

Hello!! I'm Dence, I'm a college student from the Philippines taking up Industrial design....

Hi .I'm Deepa Anandhan from India. I'm an Mechanical Engineering Student and I'm intrested...

Learning product design sketching hope this book will help me in what im looking for....

Great, you have great energy, the journey is gonna be fun toward your upcoming professiona...

Sure, I have sent it to your email already. Let me know when you have it....

Hi! I'm Mely Gay from the Philippines. An Architect student and I are looking for differen...

Hi Chou-Tac, I haven't received the email can you have look into it please ?...

I am living in Guadalajara, Jalisco, México I like drawing because it's an excellent way...

Hello Boyce, Sure we can keep in touch. I am actually working on my new website on F...

I love product design....

Hi, I'm an engeneer and I want to inprove my dayli skteching with the help of that little ...

Hello, My name is Boyce and I'm a freshman in high school trying to get a design internshi...

Im studying industrial design and i dont know how to sketch/draw... i want to improve my ...

I enrolled in a industrial designer coarse and i dont know how to sketch/draw..i really wa...

just wanna learn for fun...

Awesome Norman !...

Hi Alexander, I invite you to try this video tutorial: https://www.thedesignsketch...

Hello Theo, You can now check your email. :)...

Hello, I have not received the email, could you please look into it?...

Welcome on board Ness!...

Hey hello Aniruddha : )...

I'm a lapsed product who predominantly practices service design. A chance opportunity to t...

Sketch for product design....

Hi, I just want to get better at drawing because I truly enjoy it....

Hey I really appreciate the content! I'm currently studying to be a product design enginee...

Thank you very much Percio for your references. Happy Independence day for Brazil !...

Hello Nichole, This is such a great initiative you take to grow your drawing skills! ...

Hello Curly, Feel free to download the Designer Starter Kit as well. You will learn...

Im from the PH. Im looking for a great resource on product sketching so I could enhance my...

I am a 14year old from Philippines and drawing anime is my hobby but I want to open my hor...

Hi Chris, After the Designer Starter Kit, I invite you to try the Cube Mania Chall...

Great Tina, Yes it is so good to draw. Drawing is fun and it is also like meditati...

I'm from North Carolina, USA. I am studying industrial design and need extra tips because ...

Dear friend Chou-Tac Chung You made my Day a happy day... Today is a special Day. I don...

I'm from Northern California and simply enjoy drawing and hope to gain some insight...

Hello Komal, I have sent the guide to you in your email manually :)...

Hey! I’ve not received the kit yet. Please look upon it. Thankyou...

Sure Rick, you can receive it by filling the form at this link: https://www.thedesignske...

Hello, I’m about to start studying product design at school and would like to learn to s...

Hello Jeam, if you lose opacity, I guess you might be facing a bug. Try to reinstal Sketch...

hello there, i was wondering if you too have the problem of quality loss when you resize d...

Hello David, Do you mean you need basic foundation for design sketching, or specifical...

AM A BEGINNER AND I NEED BASIC FOUNDATION...

Thanks for sharing Derek! Carol Dweck has a great definition of the Growth mindset. ...

Seriously great blog ‍ Thank you so much for your valuable insights, the right mindset i...

Hello Peter, fully agree with that. I wrote an article on the 3 rules of making our 10 0...

Hello Luisa, I am glad you enjoy the tutorials on the blog. Let me know about your progres...

Hello! I'm Luisa, from Mexico. I'm a graphic designer, but I'd really love to study Indust...

Hi, I'm Peter from sunny Scotland. A Graphic Designer and Illustrator but always looking f...

Build ties between grade levels at your school by partnering up a younger and an older stu...

I like when you say "have your sketches make more sense". That is definitely the Designer ...

It is all fine, you don't have to get Facebook to get the guides. :)...

My pleasure Fauzul. It is always exciting to make progress ! No matter what level we are....

Great you are back in Sketching ! : D...

I am a Graphic designer and illustrator based in Zimbabwe and would like to get more into ...

I love your work. I am a production designer in television. I want to learn to draw in Mo...

I’m a student of industrial design, I would love to draw good, and to be able to show sk...

Hi, I just want to get better at drawing because I truly enjoy it....

I'm Julian in Ecuador and I just want to get back into sketching. It's been a while and I'...

Hello, my name is fauzul . Im from indonesia , ilove this guides . This is really really g...

I don't go to facebook......

Good day! I'm Jeremiah, I reside in Costa Rica and my plan is to better my drawing so I c...

Hello Xenia, What I learned with airlines is that some products are kind of in the gre...

Hi chou, i quick question. I have an wacom cintiq 16, i tried once bringing it on board an...

Thank you for the reference. How is it going with it ? :)...

I use a XP-Pen Deco Pro https://www.xp-pen.com/product/432.html Drawing Tablet and Clip St...

My pleasure Randy !...

Hi, I'm a product design engineer and I want to refine my sketching skills....

my name's zoya and i want to improve my skills in product sketching as i am an aspiring de...

As an instructor located in U.S. I found this content could be suitable for my course. Tha...

Hi, I am a design student working inside automotive industry and many designers always sai...

Thank you Arevik. I am glad you are enjoying the blog content : D...

hey im sadman. im from bangladesh. i wanna be an artist....

Hello, I am Kiran. I come from India . I am an accessory designer . I want to improve m...

very usefull tutorials . to the point. and not only about getting a nice sketch, very good...

Hello my name is Juan I come from canary island, spain. I'm an industrial designer who is ...

Thanks!...

hi,my name is Solange Mah from Cameroon,am a teacher and i would love to improve on my dra...

Hello Luis, That's a great reason you have to learn how to sketch. You will gain so mu...

Hi, I've trouble lighting and shading the pillars of a scene I've drawn. they continue ...

Hi, my name is Luis Román Beltrán, I was born and raised in México City, i'm an industr...

wanna learn design sketching...

Thank you!...

Keep Rajeesh. It is all about learning. Get prepared and apply again :). ...

All the best Fernando! Take care. : )...

Thank you very much for this post. I'm not actually having a great time at design school d...

Thank you...

Hi, I'm Rajeesh from India. I'm pursuing my bachelors in industrial design, I'm very weak ...

Hi everyone. I’m from Brazil and want to start in blades and tools design!...

I am a product design student...

Hi! I haven't got any guides for the last two days....

Hello, I am an industrial designer, I work in advertising and I would really like to impro...

Hello Judith, I am glad you are enjoying drawimg with the Cube Mania Challenge !...

Hi,I am judith from Malta.I have to start learning the cubs for landscapes because I feel ...

Hi!...

Hello Sonal, From tomorrow, you will receive every 24 hours the next guides with links...

Hi. I went through the first guide book. Are there step by step videos on the blog, so tha...

Hi My name is Nicole and I'm interested in product sketching. Even though I'm 13 I want to...

Hello Marcela, A Tip I could give if you draw standing holding your sketchbook is to h...

Hi! Thanks for the article. Do you have any recommendations on how to keep good posture wh...

Hi im nico from colombia in really intrestd inproduct sketching...

Hi, Kamal here from India. I am interested in industrial drawings....

Hi Kamaal here from India. I am interested in industrial drawings....

You will find plenty of tutorials on the blog. The designer starter kit will be helpful...

Sure you can. Keep feeling inspired, learn the basics and enjoy along the way without fear...

I really like your drawing method I hope I can draw like that one day sometimes I feel bo...

Hi, Need to develop my sketching skills. All the books out there only show developed sket...

heya looking to improve my sketching before starting a product design course at universi...

I am a student looking to major in product and industrial design and want to improve my sk...

Merci....

hi i am new here...

Hi All! I am Ola. I am a biomedical engineer, and currently, I am working as a product des...

sketching is my passion i like to make mandala art in different ways. that was fine art d...

Hello Clément, I send you all the best for your Drawing journey !! : D...

HELLO everyone, how are guys, hope doing ok. Well I ´m from Brazil, in 2017 I had a st...

Hello Gergely, My pleasure, glad you enjoy the design sketching tutorial with Sketcha. ...

Hello Rachel, Yes learning how to sketch design sketching will give you so much more fu...

Hi there! I'm Rachel. I'm from Australia. I've decided I want to switch studying paths...

Dear Chou-Tac, Thank you very much for your tutorials! Could you help me please? I ha...

Hello! I'm Max from India, I pursue Designing and especially Design Thinking to channel m...

Hi I am mayank, I am from india and want to learn product designing and to improve my s...

Currently studying product design and need to up skill, to be able to convey my ideas with...

Present ideas...

Hello Hari, You will need to go through the basics of perspective. It is fundamental...

Hello Olivier, Yes I agree that sketching will be greatly helpful to create your own co...

hei, Olivier here from a Belgian village near the Dutch border. I partly trained as an arc...

sir how did you acquire knowledge on mechanical part do you have any book reference...

I love design and i santos to love Drawing as well! Spain...

hi can you send me the starter pack . I still didn't receive even though I have submitted ...

Thanks for sharing...

Thank you for sharing. Sketching is art and daac helps you to grow your skills....

Thank you Santosh for your response. :) Yes, sometimes emails like to play Hide and se...

Great initiative !...

Hello! I am an architecture student. I am trying to improve my sketching so that i can com...

check them in the promotion area of your mail.I too got this problem....

Australia Just like to draw and want to improve. I thought I was pretty good, but stopped...

Hi! I’m come from Taiwan ,I’m a college student . I want to be a industrial designer i...

I want to know how to draw that. Thank you sooooo much!...

Hi I am Abhishek from India, I want to learn to draw to increase my basic concepts on pr...

Hey!! I have not received the starter book...I tried 3 times!! would you please send it to...

Hello Anthony, I just come from the gym and while I was running, I thought about how I...

Hi! My name's Anthony. I'm from Indianapolis, IN, USA. I've always loved putting pencil to...

Hi Chou-Tac, that´s actually a very nice productivity hack. So often it´s about doi...

Congratulations! It must feel like a great satisfaction this appreciation you have receive...

I am from India.Just started designing concept products,so i think will be helpful to desi...

Thank you very much! I am an Industrial Designer from Colombia, and I'd like to be a car ...

hello everyone my name ıs ahmet baturhan,ı am from turkey and ı wanted to be a good ske...

I am Aakmal from Malaysia. I want to make a webcomic one day, and I have no more time to w...

Hello, I'm Kevin. As an industrial designer, I need to improve my sketch skills...

Hello Yuri, The iMac was on top in the cabin. No problem on the format. About ...

hi Chou, so you put your 22inch cintiq on a box, wrap it p well and hand it to them to pu...

Welcome on board Jose! A great journey is waiting for you!...

My name is Herman I'm for Washington, DC. The reason why im learning how to s ketch (again...

Hello I'm Jose, i'm an electronic engineer but draw is my passion so i want to make a livi...

Hello Chou, I have not receive an email with the book! Please send....

Hi! I'm Zubayr, from the US, & I'm excited about sketching because it's a very useful ...

Hi Chou Tac!!! Thanks a lot for your AMAZING work. I'm learning through your site, the Des...

Need to find effective online marketing that isn't full of crap? I apologize for sending y...

I am a mechanical engineering student and I want to learn sketching because it is importan...

It's hard to come by knowledgeable people about this subject, however, you seem like you...

Hey, Im from India. Love sketching, would love to sketch faces and postures all day long.....

Hello, My name is Liana and I'm hoping to become a product designer but focused in the VR ...

Thank you very much ...

Hellow lam student design thank you very much for your tutorials...

Hi Chou Great page, congrats. Im an industrial designer from Brazil and design curator o...

Didn't receive an email with the book! please send :)...

I have registered but didn't get the book...

Welcome Joni ! Whenever there is anything I can help, let me know :) Chou-Tac...

Hello, they call me Joni. Industrial Designer, concept designer and 3D-modeller when need ...

Hi I'm Jared a hobby sketcher and very much interested in product design from the drawing ...

Hello, I am Rinaldi. I am Indonesia working in Japan. I want to sketch electric bikes, an...

Hi, my name is Lada, I am from Ukraine and I like art and drawing and of cause I am intere...

Hello James, The registration will open soon. I am still working on the release date....

Hey Chou Tac! I was wondering I can still enroll in your course? Is it still open or wi...

Hi, i'm franz, ex-writer who likes insects and drawing....

Hi, im from Portugal, and im a art student and i want to get better at sketching because i...

Hey there, Do you want to reach new clients? We are personally inviting you to join o...

Hello, My name is Niki, I am from Bulgaria. I want to learn sketching as hobby....

Avec plaisir Alan ! Glad to share some French words with you. :) Bienvenue !...

Hi, I’m lily and want to learn sketch/ lily...

Hey! I'm always unsafe while sketching. Now want to start from beginning and i think here ...

Hi, I'm rex and want to learn sketch/...

Hello Andrew, That is a very cool first Wacom tablet you have. I had the chance to ...

Hi I recently purchased a wacom pro 24. It is my first cintiq and im finding it very hard ...

Hi from Scotland, I would like to draw but want to get sone technique and good habit. Merc...

Want to see my thoughts on paper...

I'm here for the only purpose is improving my sketching!...

Hi, i'm monica from Indonesia and want improve my drawing skill....

Hello Krish, Brahma time. Thank you for the story, I am happy learning something ab...

Hi chou sir, I sleep around 9 pm and wake around 4. That way I can concentrate more on wa...

Hello Violet, when you pack your Cintiq, make sure your package is "slim" so it has higher...

HI thanks for the tip, I’m in a similar situation traveling from Mexico to Canada about ...

Looking to revise my sketching basics ...

I want to pursue a master’s degree in industrial design. for that, I want to improve...

Nikitas, from ukraine. I love to draw so i want to improve my skills...

Hope you will find lot of fun here Mike :)...

Your message touched my heart Isabelle :) How old is your daughter? I wish her all...

Hi Chou-Tac, I have been following your work for two years and I admire your kindness a...

Hello Luis, I am glad with the course you make your life happier with sketching as an ...

Hi Chou-tac, since I saw your course for the first time a couple of years ago I decided to...

Hi I’m an industrial designer from Kenya working for a 3D printing company and I would l...

Hi, i am Vinayak from India, I’m a design engineer, I’m trying to improve my sketching...

Hi, Vinayak from India, I’m a design engineer, I’m trying to improve my sketching skil...

Hello! I am Fernando Ruiz from Los Angeles. I want to improve my sketching skills to creat...

Sure Jay, You can now find it in your mailbox :)...

hi i still haven’t received my designer starter pack after registering my email address....

Hello, i want learning a new skill, i am a industrial designer student....

Hello, i am a industrial designer. Awesome work...!...

If you have any link to recommend, it is welcome Harshit. :)...

hi I'm a product design student .im from India and I want to improve my sketching...

Well always interested in sketching, definitely want to improve my skills....

Great Listening Technique during designing. I too listen to BGM of english movies...

I want to learn product design , im a budding film student from india. Love to all studen...

Welcome on board Irina!...

first time sketcher...

That's very inspirational. Thank you for sharing your dad's wisdom with us. :)...

Thanks for sharing! I fully agree. My beloved father used to tell me: "A limitless effort...

My pleasure Reidar !...

Hello Percio, Thank you very much for your add on the information. I appreciate your...

Thank you for keeping me focused. This is really interesting....

Hello! I'm an interior designer from Romania and feel like hand-drawing will take me to th...

Hello Laura, When you draw in other places than your desk, don't focus on perfection. ...

Hello Harshit, You have 2 solutions. If you watch the movie alone, you can pause anyt...

Thanks for the article! I would like to practice more sketching in places other than in a ...

My friend Chou-Tac You've said & I comment: 1.) Talk to people: listen...

can wait to check this out...

Hi, Im architecture student from Brazil. Thanks...

Great information and techniques but could u explain me how to drawing while watching movi...

Hi, Just start learning industrial design sketching and im from Australia....

My name is J.Arthur from Colombia, the drawing is a universal code to communicate and each...

I have always loved to draw, but I’ve been scared to pursue it. I want to study Product ...

Some designers say they sketch for about 10hrs per day. How's that possible ?...

Hi, I'm CJ from Singapore. I am a 3D hard surface modeller and I want to improve my drawin...

Hello Jask, You have basically 2 types of paper. Inkjet and Laser paper. They are spec...

Hey Chou!, I wanted to ask you what stationery do you use. What is laser paper and what k...

Hi, i´m Jasper a mechanical engineer from the Netherlands. i always wanted to be able to ...

Hi my name is Satyam Shukla IAM from Bhopal MP INDIA, IAM currently applying for design sc...

Hello Fariha, can you send me an email at choutac@thedesignsketchbook.com ? :) ...

I haven’t received my designer starter pack even after signing up ☹️...

Hello. I'm a mechanical engineer from Slovenia, and would want to improve my drawing skill...

Hi my name is samdaniel I am from tamilnadu I just joined bachelor in design I need to imp...

Hello I'm a Industrial Designer and want to improve my skills...

Hi!! I'm an industrial designer and I want to improve myself. I love sketching and i want ...

Hi Chou-Tac, Would you please send me the designer kit ebook, I didn't receive it afte...

I am from India.I love to draw. I want to improve my skills....

Hello! I am a product design student and I hope that your tios and tri ks would help me to...

Hello! My name is Velicia and I am from Indonesia. Since I was a kid, I have always wanted...

i'm a student studying industrial design in guangzhou and i learned a lot from your vedio....

Learning something new...

I’m DISON from China in shenzhen, I’m not good at drawing so I want to learn to sketch...

I love to draw, it’s one of my hobbies, and I want to improve. Perhaps I can use my tryi...

hi Choutac, I'm Hang from Vietnam, I've watched your videos on youtube and I want to know ...

Want to improve my skills in skitching....

hey, i wanna ask something. What's the difference between Industrial Design and Industrial...