Theories that explain “light reflection on glass surface” are complex and can take a lot of time to fully explain. But it can also be explained in 4 steps only!

For now, we’ll approach things simply, using a light reflection method that takes advantage of shortcuts.

How to draw light reflection
How to draw light reflection in 4 steps

The first shortcut is to treat all similar transparent surfaces, such as plastic, like glass.
Even if these materials don’t have exactly the same reactions to light,
you can generally use this trick to simplify the process.


TIP

In most cases, a designer’s sketches are not meant to be ultra-realistic, but to be simply a viable representation that is both forceful and attractive.


Drawing with light reflection

Below are some concrete approaches ready to be put into practice for fast and effective results. With these, you will gain confidence and be able to begin to tackle more complex subjects.


TIP

No matter how complex the object is,
you should represent the reflection of light in the most simplistic way possible. 


In drawing light on surfaces, there are multiple factors in play, such as reflection, refraction, light transmission, and opacity. Some surfaces are less reflective than others.

For our exercise, we’ll assume all reflective surfaces act like very reflective glass. For this sketch, we’ll simplify the image and discard all but the essentials.

See also  Draw Your Way to Happiness: 10 Tips to Make Art a Daily Habit

How to make a Light Reflection drawing


The reflection on the plastic surfaceI’ve selected the four following factors to focus on:

  • The thickness of the glass
  • Surface shape (is it flat or curved?)
  • The illuminated area
  • The background elements

TIP

Minimize the number of factors to simplify and clarify the image.


Sony-earphone-zoom-in-1-cho

1. Thickness of glass

Draw the thickness of the glass lining the edges of the object. This inner line should be very slight.


Sony-earphone-zoom-in-chout

2. Surface shape

You can draw reflections with outlines that don’t exist on the object in reality.

These outlines make the edges of the lit area clear and will help you to draw around the illuminated area without breaching it.

Remember to keep your lines fluid if you’re drawing a curved object.


Sony-earphone-zoom-3-in-cho

3. The illuminated surface

The area where light is reflected by the object will be completely white. This will create a contrast that gives the impression of reflected light.

Spot of error: Note the presence of a curved line that cuts an area in half. That is, in fact, part of the original ellipse of the sketch. I made the mistake of beginning my sketch with overly heavy lines.


Sony-earphone-zoom-in-4-cho

4. The background elements

This is the main secret:

While drawing, place your light reflections in a fashion that means they hide some of the visual elements placed behind them. Of course, make sure what you block out doesn’t take away from the comprehension of the drawing. If the image is symmetrical you can hide a fair amount, as the brain will automatically recreate the hidden part of the drawing.

See also  3 Design Tips to get inspired from an abstract painter

Sony-earphone-c-choutac-chung

I used three drawing utensils:

  • a 0.5mm ballpoint pen
  • a 0.7mm ballpoint pen (standard)
  • a PILOT twin marker

Multiple drawing utensils aren’t necessary. These three are an easy combination for creating strong contrasts.


Sony-earphone-b-choutac-chung
Sony-earphone-choutac-chung

A few mistakes have crept into the sketch, but the final result still stands strong. Be demanding with yourself, but remember to keep moving and to deal with your mistakes.

You want to make a sketch, not a “technical blueprint”.


GOOD TO KNOW

A designer draws to produce ideas, not solely to create beautiful illustrations.
There is a sense of production in design work and efficacy.

If a designer aims to optimize their work and research time, the drawing too will benefit. The faster and better you draw, the more your final ideas will have the chance to become successful, and visa-versa.


This method is what I use personally in my work.
If you have your own strategies, feel free to explain them in the comments section below.


If you want to take your first steps in drawing, I invite you to download the Designer Starter Kit to start learning with the basics of perspective step-by-step.

The Designer Starter Kit exercises in 6 videos:

  1. How to draw straight lines
  2. How to draw a perfect square
  3. How to draw awesome circles
  4. How to sharpen your sense of proportion
  5. How to draw a cube with 1 point perspective
  6. How to draw a cube with 2 points perspective

Once again, these videos are linked to the Designer Starter Kit.

To enjoy the series of tutorials better,
I recommend you guys to receive the book first.

3 comments

Leave a Reply to Chou-Tac Cancel reply

Your email address will not be published. Required fields are marked *

  • Hi Gautam,

    More articles and tutorials in Basic essentials and Design Articles are coming soon.
    Feel free to let me know about your progress.

    Thank you for your feedback.
    Cheers,
    Chou-Tac

  • Good day sir,

    I am aspiring to become a designer. I just started exploring this site and I am already very appreciative of the kind of work you are doing here. I finished reading through the Basic Essentials and Design Articles (this being the last one) and I’ve already picked up on some useful information and pointers. This particular topic though, light and shadow representation in a sketch, is something I haven’t been able to grasp yet. I can draw objects but I have not been able to take them to the next level by adding the light and shadows to them to make them more descriptive. This article also remained a bit vague to me. But I hope that it would be discussed in a little more beginner level detail in the 365 K.S.drawing tutorials. I’m going to start with Sketch 1 today. I really look forward to learning many things from you, sir :)

Hello! I'm Chou-Tac, a Product Designer from France.

If the sketching methods I’ve acquired aid me in my life and in my industrial design career, I believe that they can also help you reach your dream goal as a student or professional designer.

Leave a comment in the blog or send me an email at choutac@thedesignsketchbook.com : )

Chou-Tac

Trending

Last comments

  • Al: “FL; 84; ID; trainingSep 17, 20:40
  • BM: “UK!Sep 17, 15:36
  • Kazuki Otani: “Hi, I am Japanese, brought up in France and nearing retirement age (61). I would like to prepare for my…Sep 17, 08:49
  • TRACI REIFENRATH: “Im 59 from Las Vegas I want to be able to draw and paint and have discovered i enjoy both…Sep 17, 08:40
  • Mélvilla: “My name is Mélvilla and I’m from Brazil. I’m a 20 yo Industrial Design student and I found your blog…Sep 17, 06:03
  • Angel: “Angel diaz from tx but live in wi .. The reason I want to learn to sketch is because I…Sep 17, 02:38
  • John Trant: “UK Teaching Design Looking for accessible tutorials to help train studentsSep 14, 17:32
  • Ummugulsun: “Hello, I’m Ummugulsum, 26 years old, and I am from Wales. I studied design 4 years ago but never went…Sep 14, 06:46
  • Ummugulsun: “Hello, I’m Ummugulsum, I am from Wales. I studied design 4 years ago but never went back to it after…Sep 14, 06:46
  • Hend Faiad: “I am from Egypt. I’m 30 years old. I want to learn to sketch to be able to demonstrate my…Sep 14, 01:29
  • Kashvi: “I am kashvi from India. I am 19 year old. I am pursuing bachelor of design so I want to…Sep 11, 12:05
  • Maria: “I am a 71years old woman from the Netherlands. I teach people how to draw. And I am staying curious…Sep 10, 21:22
  • Nam Binh Trinh: “nothing beside learning to sketchSep 10, 21:01
  • Liana: “I’m from Canada. I have success with my drawing and watercolours but my perspectives are still really weak. You are…Sep 9, 22:25
  • Irene Sharkey: “I am from Canada. I am in my 70s. The process intriques me. Scrolling I found a link. I want…Sep 9, 21:41
  • Kit: “Challenge myself to sketch wellSep 9, 15:31
  • Nasser: “Hi, im a data scientist from kuwait, im 44 , i used to be an artist back in the day…Sep 9, 11:35
  • kunal singh: “HelloSep 8, 20:26
  • Sally Cespedes: “helloSep 8, 12:11
  • Shyam u tiwari: “I come from IndiaSep 7, 14:39
  • nainsuk: “thank you!Sep 7, 05:07
  • Aniket Dash: “I come from India. I am 25 years old. I want to sketch cars and consumer electronics. I discovered this…Sep 5, 17:18
  • Georgia: “Alabama, USA… 43… I want a relaxing hobby and also to be able to sketch castle ruins when I visit…Sep 5, 09:03
  • Z: “.Sep 3, 08:28
  • Pamela: “Photography isn’t as satisfying as I thought. Looking at other peoples sketches lets me feel more connected to a place…Sep 3, 02:13
close-link
Start Sketching Today Step-by-step!

GET YOUR DESIGNER STARTER KIT NOW!

The
close-link
The
YES! I NEED THE BOOK!
Send me The Book
close-image