How to draw Straight lines with confidence as a Designer/ The 4 exercises

Hello guys ! Many beginners wonder how to get started in design sketching. You may tend to have clumsy sketches no matter how much effort you put in. A good way to improve from start is to work on your quality of lines. So you will gain confidence using the basic movement of sketching. And…

>> Read more

How to draw Sneakers in 3D (The express live demo in Madrid)

In visit to Madrid, My parents and I had the chance to meet up Pedro, Antonio and Amor eating Tapas. The whole night, we talk about design, sketching and many other topic related. During the conversation, Antonio asked me if I could show him how to sketch a sneaker in 3D. So we decided to…

>> Read more

9 sketching tips for beginners drawing a Power Bank

Hello guys, today I am in London visiting my friends, and also Vietdong, who is one of my new beginner student of Sketch Like The Pros. We are going to do a quick demo giving you 9 sketching tips for beginners, drawing a Power bank. 🙂 See you ! Cheers, Chou-Tac

>> Read more

How to stop sketching flat in 2D and start drawing in 3d volumes

Ola from Madrid ! Como estas ? I am now writing to you from Spain, where I am visiting Madrid with my parents. And also preparing the next video vlogging I did in London last week-end – where I had a dinner with one of my student, VietDong. 🙂 Meanwhile, I have prepared for you…

>> Read more

How to draw a sphere + an ellipse on its surface in 2 min ! (Light bulb) | TIP 199

  Hello guys, How are you today ? I was giving some corrections to one of my student Zhen Bian from China from my course Sketch like the Pros – and I though I could share it with you too ! The exercise is about drawing a light bulb. And here is a quick tutorial showing the first…

>> Read more

3 techniques to give visual impact to your sketches | The Design Sketchbook Show! #1

Hi guys, Today I am in Seoul, Korea ! It’s amazing and also super cold here. About -7 degrees outside. Ohoh ! Getting warmer back in my room, I thought it would be cool to publish the replay of our Design Sketchbook Show here in the blog ! In case you missed it, I show you…

>> Read more

Rise your perspective skills – by dividing a box

Hello!! I have prepared for you a cool VIDEO tutorial introducing the 3rd point perspective! It will give your sketch an extra level of realism!  This tutorial will help you visualise simple volume in 3D space. We’ll be using simple rule of geometry (division and subdivision) that will help you to trim your volume with precision, but…

>> Read more

Car design Tip | Sketch with the “Happy Accident”!

Hey guys, Today I would like to share with you a Tip I learned at my Design school. When I was student in Product design, I was so fascinated by Car design that I went to ask for information to the transport design students. One of them shared with me that his teacher one day…

>> Read more

How to draw 3D volumes | TIP 172

There is common mistakes that everybody do as a beginner. The flat sketch. We draw what we see and it’s obvious there is something wrong. But we can’t figure out how to solve it. If you are today at this stage, no panic. It’s nothing related to having talent or not. The solution is actually pretty simple. It’s…

>> Read more

How to draw multiple cylinders in perspective | Part A

Let’s look at how to draw cylinders in perspective. For this Part A, we will get interested in the top surface of a tube – which is actually “a cylinder within a cylinder”. You can see similar case for a camera lense for example. Below are the steps in picture ! 🙂

>> Read more

How to draw a sphere? And spot the XYZ axis |TIP 166

Hi guys, Last time we saw how to draw a circle (ellipse) in perspective. Today it’s time for a bit more advanced tutorial where we’ll draw a sphere with a minimum of lines. If you like challenges, your goal will be drawing the XYZ axis from a sphere! Before starting, make sure you have been through…

>> Read more

Draw more ideas with the random product technique + Photoshop quick render

Personal note: ”This past week has been very exciting with the launch of the course |SKETCH LIKE THE PROS|. It’s a real pleasure to see such enthusiasm from so many people around the world who share the same passion for Design Sketching. I would like to thank all of you for your awesome support for…

>> Read more

How to draw a cube with 2-point perspective | TIP 155 | VIDEO

  Last week we sas How to draw a cube with 1-point perspective and how to recognise weither you need 1 or 2-points perspective. I guess you also saw how easy it is to draw by just following the steps. So today, it’s time to draw a cube with 2-point perspective. How to draw a…

>> Read more

How to draw a cube with 1-point perspective | TIP 154 | VIDEO

Pretty often beginners feel overwhelmed in front of perspective. There is so many lines going here and there that we even don’t know how to start. So I made this video to show you stroke-by-stroke how to set the perspective scene and draw a cube inside. In this video, you will realise it’s actually pretty…

>> Read more

Sharpen your sense of proportion | TIP 153 | VIDEO

Let’s contniue with the video tutorials exported from the exercises you can find in the book : the Designer Starter Kit. Feel free to download it and find the right elements for a good start in Design sketching. This week we already saw: How to draw straight lines How to draw perfect squares How to…

>> Read more

Page 1 of 3